The
shipping tag indicates 826 pounds of weight. The fan is
driven by a 2 horsepower 3-phase motor. The water
inlet and outlet are about 1.25 inch ID. The input
area is about 44" by 27" (cut back to 24" with a sheet metal piece as
shown below). The unit is about 71 inches in total length. In
addition to the air handler, this unit includes a DRI STEEM Vapor-Logic
microprocessor based control system humidifier. The
following link goes to the factory website for the humidifier section. The
control section and moisture source are in the foreground of the image
above. The black hose takes the moisture to the dispersion tube
in the air stream and the unit at the top is the sensor that provides
feedback regarding the moisture content of the airstream. The image
above is the upper sensor. The image below is looking in the
bottom of the stack at the moisture dispersion tube. The base
of the stack is about 17" square.


