(THIS PAGE BEST VIEWED WITH FIREFOX WEB BROWSER)

This page is a list of things not currently listed in our stores because these items are waiting for parts, need other repairs, need someone to test them or we just have not yet gotten to listing them, etc. Again, as we are not ready to formally list these items, information here is very minimal--not at all what would be provided with a formal listing. Note that images are "candid" shots taken in-place without cleaning, lighting, posing or power. This list is by no means complete--it is just a small sample of the not yet listed items we have.

If you have an interest in an item in this list please contact us and we can accelerate getting it listed for you. Be sure to let us know how to get back in touch with you and last but not least, make sure we know what item(s) you are inquiring about (preferably by referring to the item's CA #).

See our
Ebay Store

charles@cavlon.com 505-242-4610 warehouse phone/answering machine/fax 505-417-4116 cell phone

NOTE: The page is subject to frequent updates so come back often. 10/14/09

(IF YOU USE FIREFOX AS YOUR BROWSER, RIGHT CLICK AN IMAGE AND THE CLICK "VIEW IMAGE" TO SEE IT IN LARGER SIZE AND PROPER ASPECT RATIO) (If your web browser shrinks to a small size on some webpages, send an e-mail to charles@cavlon.com and I will tell you how to change your web browser setting so it does not do that anymore).

(Note, there are a lot of images in this page and it takes a long time for all of them to load!)


CA# 7014 Hurco KMB 1 CNC mill. Powers on but seems to have a limit switch malfunciton when trying to calibrate. Includes tooling
image 2 image 3 image 4 image 5 image 6

CA# 7015 Hurco KMB 3 #2 CNC mill in maching room seems to have more issues, candidate for controller upgrade includes tooling
image 2 image 3 image 4 image 5

CA# 7016 Hurco KMB 3 #1CNC mill in maching room seems almost but not quite fully functional. Includes tooling
image 2 image 3 image 4

CA# 7017 Wells Index CNC mill retrofit in machine room was we were running it before last move. Great machine but software not very good. Upgrade candidate.
image 2 image 3 image 4 image 5 image 6 image 7 image 8

CA# 7018 Servo Impact Little desk-top CNC mill in maching room. Runs fine manually but did not get to try computer link software. Expensive compared to others


CA# 7019 Stepper drive motor test head assembly. This is probably more for someone who needs a robust X-Y and rotation Motion Control Apparatus than for its original design purpose as a test head manipulator. No attempt to try functionality (powering the stepper motors to move around each of the axis) to date.
image 2 image 3 image 4 image 5 image 6 image 7

CA# 7020 GEM NEV Electric car needs parts ordered basically all working except for the 72 to 12 volt power converter. Drives around fine, just don't have any 12 volt accessories as is. Needs battery pack (6 ea. 12V deep cycle lead acid) for rated performance.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9

CA# 7021 Linear Coordinates Robot Seiko D-Tran XM5106-20 4-axis? 40, 25 and 12" travel for 3 of them. Has controller. Mounted on extruded aluminum frame. Pendant and cables???
image 2 image 3 image 4

CA# 7022 Single Radial Robot in enclosure Seiko D-Tran RT3200
image 2 image 3

CA# 7023 Double Radial Robot on stand Seiko D-Tran RT3200
image 2 image 3

CA# 7024 Plasma Table CNC Messer PM 6 by 12' with Hypertherm 78022 flat panel control computer. Table has dampers that open as the carriage moves so suction only where needed. Operates mechanically but have not gotten plasma yet. Got new board but have not finished install and calibrate . This unit originally sold for about $150K.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9 image 10 image 11 image 12

CA# 7025 Double Radial Robot Seiko D-Tran RT3200
image 2 image 3 image 4

CA# 7026 unmounted Radial Robot Deiko D-Tran RT3200 with controller and pendant. Not yet attempted to power up.
image 2 image 3 image 4 image 5

CA# 7000 Adept Robot 1 Powered up controller but no successfull remote dispaly or action to date


CA# 7001Adept Robot 2 No attempt to power up on our part to date
image 2

CA# 7002 Adept Robot 3 with visions system reported running demo when packed up but no attempt to bring up on our part
image 2

CA# 7003 PUMA 200 UNIMATE Robot Arm no controller no attempt to do anything with it to date


CA# 7004 Charmilles P25 3-part Plunge EDM with rotary no attempt to hook up or power to date
image 2 image 3 image 4 image 5

CA# 7005 MAX SEE Plunge EDM all in one. Had running for several hours doing test work then blew power board trying to fix a signal error. Board repaired but never reassembled.
image 2

CA# 7006 PUMA Unimte 200 Robot arm rebuilt by Advance Research & Robotics
image 2

CA# 7007 Quick Circuit 5000 PC Board Router not sure if there is a controller somewhere, no attempt to do anything with it to date
image 2

CA# 7008 FTS Systems Super Coold Liquid Chiller -80C typical no attempt to operate or power up.
image 2 image 3

CA# 7009 Yale Standup Stock Reach 4500 pound forklift reach solenoids operating erraticallly no battery pack.
image 2 image 3

CA# 7010 Temptronic Temperature Forcing Unit Switch "instantly" from -80C to 200C air or inert gas temperature 386 computer not working
image 2 image 3 image 4 image 5 image 6

CA# 7011 Large LED Color Sign Prototype. Heavy steel frame on wheels, 10s of thousands of color LEDs some power supplies not complete 2 versions of LED strips.
image 2 image 3 image 4

CA# 7056 Prototype LED Sign Display
image 2 image 3 image 4 image 5 image 6

CA# 7012 Instron 4505 Test frame for compression tension have not figured out electronics for controlling manually locally yet
image 2 image 3 image 4

CA# 7027 Matra-Werke Germany D-10 Metal Lathe 23" gap swing hydraulic tail stock. Needs spindle DIN adapter finished. Have had it running. Includes some tooling
image 2 image 3 image 4 image 5 image 6 image 7 image 8

CA# 7028 CROWN 16" swing lathe in Machine Room with tooling currently under power
image 2 image 3 image 4 image 5 image 6 image 7 image 8

CA# 7029 Robot Motoman YR-P8-A000 8 KG load have not confirmed match with controller have not done anything at all with it yet
image 2 image 3 image 4 image 5 image 6

CA# 7030 Robot 6-axis? Fanuc S-Model 700 with controller less than 200 hours. Have not done anything at all with it to date.
image 2 image 3 image 4 image 5 image 6 image 7

CA# 7031 6-Axis? Fanuc Robot S-700 with pendant, controller, JR3 and 260 hours. Nothing done with it to date.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9

CA# 2679 Old Ebeam Welder from Sparton 5 parts, no attempt to connect or test yet.
image 2 image 3 image 4 image 5 image 6 image 7

CA# 7032 MX Fuel Dispensers includes credit card reading parts


CA# 7033 Large LN2 tank on wheels 3 axle about 7' diameter by 13' long. Needs external clean and painting.


CA# 7034 MM Sphereical LN2 tank 6' diameter. Last used as a movie set item.


CA# 7035 MM 350 KW genset 50/60 HZ Wide range of voltage options less than 700 hours taken from a working system
image 2 image 3 image 4 image 5

CA# 7036 MM Vacuum system about 64" tall by 24" diameter chamber with lift stand and accessories. Nothing done to date.
image 2 image 3 image 4 image 5

CA# 7037 MM 250 KW Battery Backup UPS Taken from a working system 480 volts 3-phase with 208 volt transformer
image 2 image 3 image 4

CA# 7038 MM 250 KW motor generator converts 60Hz to 50Hz only 3200 hours taken from a running system.
image 2 image 3 image 4 image 5 image 6

CA# 7039 FG Wilson PA40 40KW genset on wheels runs great needs 480 volt switch hookup Perkins Engine
image 2 image 3 image 4 image 5 image 6 image 7

CA# 7040 Stanley HP-1 Hydraulic Power source on wheels Air cooled gas engine. Includes 2 Hydraulic accessories--boring motor and submersable trash sump pump.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9 image 10

CA# 7041 J&L Optical Comparator PC-14-A. Have not done anything with it to date other than plug in and see some sort of light comes on.
image 2 image 3 image 4 image 5

CA# 7042 Over sized Drill Press VanDyck Churchill 425 to 1780 RPM 1 hp 3-phase 32" square table 16" max throat 7.5" spindle travel Cleaned and tested? but not fully demo'd.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9

CA# 7043 16" Dewalt GE 614 5hp 3-phase industrial radial arm saw. Fully functional. We have used on 480 volts.
image 2 image 3

CA# 7044 100 ton short stroke assembly forming press Micro Control not working--Manual Bypass OK.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9

CA# 7045 IR Gas Air Compressor P-175-W. Runs but needs engine and compressor control adjustment to start and run properly.
image 2 image 3 image 4 image 5 image 6

CA# 7046 Post Hole Digger Auger 3-point tractor hitch type with 4 augers 7, 9. 14 and 19" diameters. Nothing done with it to date. Have not unstrapped from skid. Don't currently have a running tractor to mount it to. Looks only lightly used but weathered.
image 2 image 3 image 4 image 5

CA# 3198 Magnaflux Zyglo Dye Penetrant Inspection System Stainless Construction. We don't know enough about it to know what might or might not be missing. Looks well used but functional with installation and maintenance.
image 2 image 3 image 4 image 5

CA# 3358 Enerpac PFR2035 Heavy Duty High Pressure Hydraulic Power Unit 3-stage pump with shop made clamp and 2" cylinder
image 2 image 3 image 4 image 5 image 6

CA# 2749 AMT 510ct Structural Test Analyzer Compression Tension Tester - Great funning seeing how much force it takes to collapse a paper drinking cup or aluminum soda can. Has a serial interface. We have dumped some data out the port but have not yet found good software for graphing the output data from the serial stream in a simple to use form or a serial data input plotter for it.
image 2 image 3 image 4

CA# 7048 CRS Robotics Robot Arm and controller C500 A465 - We are not sure this arm and controller go together as we got them at different times. We did not get any cables or anything else that might go with it. However, we do have a couple other similar units. One is a complete system. Another is still in boxes. We have never attempted to hook any of them up and run them.
image 2 image 3 image 4 image 5 image 6 image 7

CA# 7050 Tektronix 485-1 19" rack-mount 350mhz analog Oscilloscope - This is the rack mount version of the vintage famous portable 4xx series for Tek 0-Scopes. Not tested at this time. We have several of these.
image 2 image 3 image 4

CA# 7051 Tektronix 577 curve tracer with 177 front porch DUT component fixture - Has suffered some handling damage--DUT right/left switch needs to be fixed. Power-on and functionality not know at this time.
image 2 image 3 image 4

CA# 7049 Test Resources 650R Materials Strength compression tensile tester with 1000 # Force Sensor - We have not yet succeeded in making this work. Have not been able to get around a control board. No software or cable.
image 2 image 3 image 4 image 5

CA# 7013 Micromanipulator 6000 base with vacuum chuck, microscope body and 2 probes
image 2 image 3 image 4

CA# 7052 Vintage Museum Osborne 1 Lug-able portable computer - This is my personal early edition Osborne dual diskette personal computer from the early 80's. It has some airline miles on it as I did a lot of business travel back then. I think I recall going to San Francisco to meet the man himself and pick it up. It worked last time I tried it but that was many years ago.
image 2 image 3 image 4 image 5

CA# 7053 Vintag e Museum Radio Shack TRS-80 Computer setup - This was my personal TRS-80 system back in the Early 1980's Includes both floppy and hard drive, along with printer, manuals, books and disks. I got it so I could diagnose problems my parents encountered with theirs for their business book keeping. It was working last time I tried it but that has been years ago. The known problem at this time is that the printer ribbon cartridge rollers have started to decay. An extra monitor is included for reasons I can't recall.
image 2 image 3 image 4 image 5 image 6 image 7 image 8 image 9 image 10 image 11 image 12 image 13 image 14 image 15 image 16 image 17

CA# 7055 1 of 2 camera stands with precision movement heads - One includes a pan and tilt unit
image 2 image 3 image 4 image 5 image 6

Small Lab Test Frame Tension Compression